M-Horse CT5 is a 5-inch touchscreen display device with a resolution of 480 X 800 pixels. it powered by a SPD SC7731c with 1GB of RAM and 16GB ROM which can be expanded up to 32GB with microSD. it features a 5 Mp primary camera with LED Flash and a 2MP front selfie camera.
M-HORSE CT5 Stock Rom
This page contains M-HORSE CT5 Stock Rom files that allow you to restore your M-horse device's to original factory state, you can also use the file to upgrade your phone to the latest version. You will find these below files useful if you have used the flashed custom builds on your device, brick your device, tweak your device and wish to return that device to its factory state. Download any version factory image you need below.
If you own an M-Horse CT5 Top smartphone and you are looking for M-Horse CT5 Stock ROM to fix your bricked phone, then you are on the right article/post. We are going to guide on how to install the official stock Firm on your M-Horse CT5. This post has a link the take you to a guide that is easy and straightforward to follow to fix your bricked Samsung. We have listed the Stock Rom for M-Horse CT5 below. Download the file to fix your device.
Take Note
Following this instruction on how to unbrick and upgrade your device from the link above us and the developer are not responsible for any damage to your M-HORSE A8, so it wise to read the post very well and understand each line before flashing the stock firmware.
Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have a backup of all your important files.
The Advantage Of Stock Firmware:
- Can be to unbrick your phone
- Fix the Bootloop problem
- Downgrade and Upgrade your phone
- Fix Bugs or Unroot your phone
- To fix the lag or stutter
- You can solve software problem by flashing Stock ROM.
- To gain your warranty Back
How to flash/upgrade this device
- Download and install SPD drivers from here
- Download the latest version of Research Download or UpgradeDownload from here
- Extract and Launch Research Download/UpgradeDownload Tool
- Click on load icon
- Navigate to the folder containing the firmware
- Select the .pac file in the firmware folder
- Wait for it to load in Research Download/UpgradeDownload tool
- Click Play/Start button
- Now connect the device to PC while holding volume down key (Some new devices require holding volume up key)
- Wait for flashing process to complete
- When you see Passed! Then note that the flashing or upgrading process is complete
- Disconnect and boot up device
Good job man.
ReplyDeleteA million thanks to you.
Keep it up!