Download Gionee Steel 2 Stock Firmware Rom (Flash File)
Download Gionee Steel 2 Stock Firmware Rom (Flash File)
Gionee Steel 2 is a 5.00-inch touchscreen display device with a resolution of 720 by 1280 pixels. it is powered by quad-core MediaTek MT6737 processor and it comes with 3GB RAM and 16GB internal storage expandable up to 128GB via a microSD card. The Gionee Steel 2 has a 5-megapixel front shooter for selfies and an 8-megapixel primary camera on the rear.
The Gionee Steel 2 runs on Android 6.0 and light on by a 4000mAh non-removable battery.
Gionee Steel 2 Stock Firmware
This page contains the Gionee Steel 2 Stock Firmware this file allows you to restore your Gionee device to original factory state; you can also use the file to upgrade your phone to the latest version. You will find these below files useful if you have used the flashed custom builds on your device, brick your device, tweak your device and wish to return that device to its factory state.
If you own a Gionee Steel 2 smartphone and you are looking for Gionee Steel 2 Stock Firmware to fix your bricked phone, then you are on the right article/post. We are going to guide on how to install the official stock ROM on your Gionee Steel 2. This guide is easy and straightforward to follow. We have listed the Stock Firmware for Gionee Steel 2 below. Download the stock ROM file to fix your device.
How To Flash Using SP Flash Tool:
Download & extract the Stock ROM (Firmware) on your computer.
Install the USB Drivers (skip this step if drivers are already installed).
Launch the SP Flash Tool
Click on Download.
Select the Scatter-loading.
Select the Scatter File from the Stock ROM (Firmware) you have downloaded.
Select Format and click Start.
Connect device >> holding volume + and volume - button of your device at the same time or holding power button only.
Patiently wait for the device to be formatted.
After format,
Select Download and click Start.
Connect device & Patiently wait for the process to complete.
Nice product from GIONEE.
ReplyDeleteThanks for the update sir.
Thank you for the firmware.
ReplyDelete