Tecno WX4 Pro Stock Rom This device is a 5-inch device with 720×1280 resolution pixels. It is powered by Quad-core 1.3GHz MediaTek Processor, and it comes with 1GB of RAM and 16GB internal storage with support for memory card up to 32GB, it runs on Android 7.0 with and is powered on by a 2800mAh non-removable battery.
Tecno WX4 Pro Stock Rom Firmware
This page contains the Tecno WX4 Pro Stock Rom Firmware this file allows you to restore your Tecno device to original factory state; you can also use the file to upgrade your phone to the latest version. You will find these below files useful if you have used the flashed custom builds on your device, brick your device, tweak your device and wish to return that device to its factory state.
If you own a Tecno WX4 Pro Stock Rom smartphone and you are looking for Tecno WX4 Pro Stock Rom to fix your bricked phone, then you are on the right article/post. We are going to guide on how to install the official stock ROM on your Tecno WX4. This guide is easy and straightforward to follow. We have listed the Stock ROM for Tecno WX4 Pro below. Download the stock ROM file to fix your device.
How To Flash Using SP Flash Tool:
Download & extract the Stock ROM (Firmware) on your computer.
Install the USB Drivers (skip this step if drivers are already installed).
Launch the SP Flash Tool
Click on Download.
Select the Scatter-loading.
Select the Scatter File from the Stock ROM (Firmware) you have downloaded.
Select Format and click Start.
Connect device >> holding volume + and volume - button of your device at the same time or holding power button only.
Patiently wait for the device to be formatted.
After format,
Select Download and click Start.
Connect device & Patiently wait for the process to complete.
Comments