How to Root Condor Plume P6 Pro Install twrp Recovery

Root Condor Plume P6 Pro via Twrp recovery is now available. If you are a Condor Plume P6 Pro user then this post is specially made for you to root your device without any problem and worries follow the guide in this post. Condor Plume P6 Pro is a 5.0-inch with a display of 720 x 1280 px resolution 2GB RAM and 16GB Internal Storage, which is powered by 1.3GHz Quad-core Mediatek MT6580 CPU Processor running on Android 5.1

Root Condor plume P6 Pro


 
To Root Condor Plume P6 Pro we are going to using the TWRP Recovery method via Flash Tool Mode. It will be wise you read the post very well before flashing the recovery to avoid any errors or brick of the device. I believe many using this device have googled on how to root their device without getting any good result worry not with this ported recovery you can now root your device in a minute and get the freedom you need to explore your device the way you like it. Read the tutorial below to the end so that you can root your Condor Plume P6 Pro



Things You Need


  1. PC

  2. VComm Drivers Window 7  Go Here

  3. VComm Drivers Window 8/10 Go Here

  4. Sp Flash Tool Download





Feature Of The TWRP Recovery


1. NVRAM backup

2. boot.img backup

3. Recovery.img backup

4. Uboot backup

5. Emmc repair

6. Recovery.img and boot.img install/flash

7.more features now working.

8.Most features are working

9. TWRP features working correctly...



Disclaimer

We are not responsible if you brick your phone at the process of flashing the recovery



 Install Recovery On Condor Plume P6 Pro



  1. Connect your device to your PC

  2. Send the SuperSu to your external memory card

  3. Discount and put your Phone off

  4. The Condor Plume P6 Pro TWRP Recovery you downloaded unzip it on your desktop

  5. Launch your Sp Flash Tools

  6. Click load the scatter file from the Sp Flash Tools

  7. Navigate and select the Android_scatter.txt file in the unzip TWRP folder

  8. Then tick just recovery in the Sp flash tools

  9. In the select option on Sp flash tools put Download  only

  10. Click Download

  11. After doing the above Connect your switched off device (with battery inside) to the PC via USB cord

  12. A progress bar should start running

  13. Wait till you get a Success message (green circle with OK), do not interrupt before then



Vola you have successfully flash recovery on your device so next thing to do is to Root Condor Plume P6 Pro, please use the SuperSu provided in this post other versions of SuperSu may not work for you.


How To Root Condor Plume P6 Pro


Immediately after flashing your recovery


  1. Boot to recovery mode (power off your device then Hold power button and Volume Key same for five Sec.)

  2. In the TWRP mode, it may ask you to swipe to allow modification of System partition, tap Read Only.

  3. If its offer to root the phone, select No

  4. Click install on your recovery then navigate to the storage you have your Magisk  SuperSu.zip select it to root your device

  5. After Flashing navigate back and reboot


Congratulation your are rooted

Now Enjoy Your Rooted Device



Are You Lost? Ask your Questions.

Share Post to Your Friends




Credit

@Porter
Emmanuel


 

TWRP Condor Plume P6 Pro


OR

CWM Plume P6 Pro


About Emmanuel

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.

2 Comments:

Your comment and facebook share will be appreciated