Warning!!!
Do before using twrp 3.0.0.0+ otherwise you cannot use the recovery. Upgrade to latest stock ROM and partitions
Do before using twrp 3.0.0.0+ otherwise you cannot use the recovery. Upgrade to latest stock ROM and partitions
* I am not responsible for bricked devices, dead SD cards,* thermonuclear war, or you getting fired because the alarm app failed. Please* do some research! YOU are choosing to make these modifications, and if* you point the finger at me for messing up your device, I will laugh at you.
THIS STOCK ROM (Gionee P3) IS THE ONE YOU DOWNLOAD AND FLASH TO USE THIS RECOVERY
Before doing this process, please take NVRAM backup in your current TWRP recovery I believe you are on TWRP 2.8.5 so, take an NVRAM backup because after you finish flashing TWRP 3.0, your phone will start showing Invalid IMEI, so you MUST take NVRAM Backup or you cant get your IMEI back. I warned you.
How To Flash the Stock Rom And Twrp 3.0.0 recovery On Gionee P3
1. Unpack the KitKat
2. Shut down the phone(remove the battery for 5 seconds, and then put it back).
3. Open Sp Flash Tool
4. Click Scatter-loading
5. Open MT6582_Android_scatter
6. Untick every partition
7. Click Format
8. Make sure Auto Format Flash is checked and Format Flash without Bootloader is checked
9. Click OK.
10. Connect phone via USB cable..and it will start the wiping process. Wait until it is finished and then disconnect the phone from USB.
11. Unpack T8072 zip file
12. Open Sp Flash Tool
13. Click Scatter-loading
14. Open MT6582_Android_scatter (from T8072 unpacked folder)
15. Make sure all partitions are checked.
16. Shut down the phone(remove the battery for 5 seconds, and then put it back).
17. Press Download button and then Yes.
18. Connect phone via USB cable.
19. The download process will begin. Wait until it finishes. (this will install the latest stock rom)
20. When it finishes disconnect phone from usb, remove battery for 5 seconds, and then put it back and power on the device. First boot may take a while so be patient. (3-5 mins)
21. After you finished the setup process, power off the phone (remove battery for 5 seconds, and then put it back)
22. Download the Twrp Recovery below
23. Open Sp Flash tool.
24. Click Scatter-Loading
24.Open MT6582_Android_scatter (from T8072 unpacked folder)
25. Make sure the only recovery is ticked.
26. Click on recovery.
27. Choose recoverytwrp3000nice.img
28. Click Download, then click Yes.
29. Connect phone via USB.
30. Wait to finish downloading.
31. When flashing is finished…disconnect from the usb..remove battery for 5 seconds, and then put it back.
32. Then press power and volume+ and you can boot into recovery
33. ENJOY! Now you can reflash any rom you want via twrp 3.0.0.0
I tried to explain as easy as possible. Try to follow every instruction and you will be ok.
TWRP 3.0.0 Recovery For Gionee P3
0 Comments:
Post a Comment
Your comment and facebook share will be appreciated