Tecno S1 Stock Rom This device is a 5-inch device with 720×1280 resolution pixels. It is powered by Quad-core 1.3GHz MediaTek Processor, and it comes with 512MB of RAM and 16GB internal storage with support for memory card up to 32GB, it runs on Android 6.0 with and is powered on by a 1500 mAh non-removable battery.
Tecno S1 Stock Rom Firmware
This page contains the Tecno S1 Stock Rom Firmware this file allows you to restore your Tecno device to original factory state; you can also use the file to upgrade your phone to the latest version. You will find these below files useful if you have used the flashed custom builds on your device, brick your device, tweak your device and wish to return that device to its factory state.
If you own a Tecno S1 Stock Rom smartphone and you are looking for Tecno S1 Stock Rom to fix your bricked phone, then you are in the right article/post. We are going to guide on how to install the official stock ROM on your Tecno S1. This guide is easy and straightforward to follow. We have listed the Stock ROM for Tecno S1 below. Download the stock ROM file to fix your device.
How To Flash Using SP Flash Tool:
Download & extract the Stock ROM (Firmware) on your computer.
Install the USB Drivers (skip this step if drivers are already installed).
Launch the SP Flash Tool
Click on Download.
Select the Scatter-loading.
Select the Scatter File from the Stock ROM (Firmware) you have downloaded.
Select Format and click Start.
Connect device >> holding volume + and volume - button of your device at the same time or holding power button only.
Patiently wait for the device to be formatted.
After format,
Select Download and click Start.
Connect device & Patiently wait for the process to complete.
Good job! Thanks for the firmware update. God bless you.
ReplyDeletethis rom got problems... sp flashtool cant load it... says error with preloader
ReplyDeleteDon't tick the preloader then
ReplyDeletehello does it work with tecno S1 MT6580M orange orange rise 32?
ReplyDeleteNo
ReplyDelete