Main PageUpdate Nexus 6P to Marshmallow 6.0.1 MHC19Q April security patches
Nexus 6P can now be updated to new Android 6.0.1 MHC19Q April security patches.
Follow our guide below to download the update and install it yourself.
Prerequisites:
•This tutorial is only for Huawei Nexus 6P and we are not sure if it
will work on the other variants of the Nexus 6P on other carriers.
•Your phone can be on any previousAndroid version or even on a custom
ROM. It doesn’t matter at all. Thistutorial will still work for
installing Android 6.0.1 Marshmallow.
Disclaimer:
This site or the developers are not
responsible, if you damage or brick your device.Do it on your own risk
and follow the instruction properly.
Important:
Backup important files stored on your device before proceeding with the
steps below, so that in case something goes wrong you’ll have backup of
all your important files.
How to Update Nexus 6P to Marshmallow 6.0.1 MHC19Q April security patches.
Step 1 – Download Android 6.0.1 Factory Image for Nexus 6P on your PC, if you haven’t already.
Step 2 – Connect your Nexus 6P to your computer using the USB cable.
Step 3 – Please make sure Fastboot is configured and properly installed on your computer.
Step 4 – Turn OFF your phone.
Step 5 – Get into the Fastboot/Bootloader Mode on your phone. Turn ON the
phone while pressing and holding the Volume Up + Volume Down + Power
buttons till you see the Fastboot menu and START on top.
Step 6 – Now extract the downloaded file anywhere in your computer. Go
to the folderhammerhead-MHC19Q and then copy/paste all the files to your
Fastboot directory.
Step 7 – From the factory image files in your Fastboot directory, do the following depending which OS you are on:
On Windows: Run the file “flash-all.bat”.
On Mac: Run the file “flash-all.sh” using Terminal.
On Linux: Run the file “flash-all.sh”.
Step 8 – That’s pretty much that you had to do for flashing the stock
factory image on your Nexus 6P. Now wait and watch as the process is
completed — or follow the on-screen instructions on your phone if in
case you have to unlock the bootloader.
Step 9 – After the installation completes, the phone will boot now and
it might take about 5 minutes to boot on your first time. So, please
wait with patience!
That’s it! Your Nexus 6P should now have the official Android 6.0.1
MHC19Q Marshmallow update installed on your phone using the
stock factory image from Google! Go to Settings >About phone to
verify.
PleaseHit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
Follow our guide below to download the update and install it yourself.
Prerequisites:
•This tutorial is only for Huawei Nexus 6P and we are not sure if it
will work on the other variants of the Nexus 6P on other carriers.
•Your phone can be on any previousAndroid version or even on a custom
ROM. It doesn’t matter at all. Thistutorial will still work for
installing Android 6.0.1 Marshmallow.
Disclaimer:
This site or the developers are not
responsible, if you damage or brick your device.Do it on your own risk
and follow the instruction properly.
Important:
Backup important files stored on your device before proceeding with the
steps below, so that in case something goes wrong you’ll have backup of
all your important files.
How to Update Nexus 6P to Marshmallow 6.0.1 MHC19Q April security patches.
Step 1 – Download Android 6.0.1 Factory Image for Nexus 6P on your PC, if you haven’t already.
Step 2 – Connect your Nexus 6P to your computer using the USB cable.
Step 3 – Please make sure Fastboot is configured and properly installed on your computer.
Step 4 – Turn OFF your phone.
Step 5 – Get into the Fastboot/Bootloader Mode on your phone. Turn ON the
phone while pressing and holding the Volume Up + Volume Down + Power
buttons till you see the Fastboot menu and START on top.
Step 6 – Now extract the downloaded file anywhere in your computer. Go
to the folderhammerhead-MHC19Q and then copy/paste all the files to your
Fastboot directory.
Step 7 – From the factory image files in your Fastboot directory, do the following depending which OS you are on:
On Windows: Run the file “flash-all.bat”.
On Mac: Run the file “flash-all.sh” using Terminal.
On Linux: Run the file “flash-all.sh”.
Step 8 – That’s pretty much that you had to do for flashing the stock
factory image on your Nexus 6P. Now wait and watch as the process is
completed — or follow the on-screen instructions on your phone if in
case you have to unlock the bootloader.
Step 9 – After the installation completes, the phone will boot now and
it might take about 5 minutes to boot on your first time. So, please
wait with patience!
That’s it! Your Nexus 6P should now have the official Android 6.0.1
MHC19Q Marshmallow update installed on your phone using the
stock factory image from Google! Go to Settings >About phone to
verify.
PleaseHit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
Thanks For You Reading The Post
We are very happy for you to come to our site. Our Website Domain name
https://androidvillaz.blogspot.com/.
Newer Posts
Newer Posts
Older Posts
Older Posts
Comments