Now you can Root Samsung Galaxy S6 G920F on Official Android 5.1.1 XXU3COI9 Lollipop Firmware.
Follow our guide below to download the update and Root it yourself.
Prerequisites:
•This root method tutorial is only for Galaxy S6 SM-G920F.
•Please do not try on any other Galaxy S6 LTE variants.
•Make sure you backup all your data in your phone before proceeding as a precaution.
•Your Galaxy S6 should be on an official firmware by Samsung, not a custom ROM.Your phone should be on XXU3COI9 Android 5.1.1 firmware.
Disclaimer:
This site or the developers are not
responsible, if you damage or brick your device.Do it on your own risk
and follow the instruction properly.
How to Root Samsung Galaxy S6 G920F on Official Android 5.1.1 XXU3COI9 Lollipop Firmware.
Step 1 – Download CF-Auto-Root Android 5.1.1 Package for Samsung Galaxy S6 LTE to your computer and extract the zip file.
Step 2 – Download ODIN v3.10.6 which will help you to root Android 5.1.1 on Samsung Galaxy S6 LTE G920F.
Step 3 – Switch OFF your phone. Now go to Download Mode. How? Press and
hold the Volume Down + Home buttons together, and then press the Power
button till you see the construction Android robot and a triangle. Press
Power again to confirm to enter into Download Mode.
Step 4 – Make sure you have your SamsungGalaxy S6 LTE USB drivers installed on your computer.
Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 – If your phone is connected successfully, one of the ID:COM
boxes will turn yellow with the COM port number. This step might take
some time.
Step 7 – Now select the file that you have to flash/install on your
phone. This file will be found from the extracted file in Step 1.
Click on ‘PDA’ / ‘AP’ and select the file‘CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5‘.
Step 8 – In ODIN, check the Auto Reboot andF. Reset Time options, if not already.
Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 – After the installation is completed, your phone will reboot
into Recovery Mode automatically and install the root package / files.
Your ID:COM box will also turn green.
Step 11 – After you see the home screen, unplug your phone from the computer.
That’s it! Your Samsung Galaxy S6 has now been rooted on Android 5.1.1
official software update. Check for the SuperSU app in your apps list to
verify.
0 Comments:
Post a Comment
Your comment and facebook share will be appreciated