The ArchiDroid ROM comes with a plethora of new features based on Android 4.4.4 KitKat, a few of which are listed below:
- Fixed hardswap not being activated on ArchiDroid 1.X, when placed on external sd card # (Reported by @bolt890)
- Added missing "semco" variant to BCM profiling.
- Added additional r_submix audio module, idea thanks to @nelsonw #
- This should help with chromecast
- Updated Modem to UBUGNF1
- Updated Boeffla kernel to 2.4-beta1 (NG)
- Updated AGNi kernel to 2.8.4
- Updated PA GAPPS to 29 July
- Updated Nova Launcher to 3.0.2
- Updated Google Keyboard
- Updated XPrivacy to 2.2.2
- Updated PhilZ Touch recovery to 6.48.4
- Updated Onandroid to 9.51
- Updated sources
Interested Galaxy S3 I9300 users can go ahead and download Android 4.4.4 KitKat ArchiDroid custom ROM with stability and performance improvements, using the download links given below:
Android 4.4.4 ArchiDroid ROM for Galaxy S3 I9300
Android 4.4.4 KitKat compatible Google Apps (Stock)
Android 4.4.4 KitKat compatible Google Apps (Full)
Pre-requisites
- The ArchiDroid and the instructions given in this guide are meant for the Galaxy S3 I9300 model only. Verify device model number by navigating to Settings > About Phone/Tablet.
- Back up data and settings using a recommended
custom recovery tool, like ClockworkMod (CWM) or TWRP, as it creates a
complete image of the existing phone setup. In Recovery, choose Backup
and Restore and tap Backup. - Verify correct USB drivers for the phone are installed on the computer (download necessary USB drivers from manufacturer's website).
- Ensure USB debugging mode is enabled on the device, by navigating to Settings > Developer Options (NOTE: Tap the phone's Build Number seven times to unlock or reveal the hidden Developer Options under Settings.) Then select the checkbox to enable USB debugging mode under Settings > Developer Options.
- Make sure the device has at least 80% battery charge to prevent unexpected device shutdown (due to battery drain) while installing the ROM.
- Ensure the device is unlocked (not locked to a specific carrier) and rooted with
the latest ClockworkMod (CWM) Recovery (v6.0.4.5) installed. If you are
installing the CWM recovery for the first time, check out the video
tutorial below, courtesy of The Android Soul: - If the device is stuck at booting or experiencing boot loop issues, perform Wipe Cache Partition and Wipe Dalvik Cache a few more times before rebooting.
- Allow newly installed ROM to stabilise for five minutes before you start working on it.
Steps to Install Android 4.4.4 KitKat Update on Galaxy S3 I9300 with ArchiDroid ROM
Step-1: Download Android 4.4.4 ArchiDroid ROM for your Galaxy S3 (use download links above) on the computer.
Step-2: Download Google Apps package.
Step-3: Connect the Galaxy S3 to computer via USB cable. Without extracting, copy the downloaded firmware zip and Google Apps zip files to the root folder of phone's SD card.
The Android 4.4.4 ArchiDroid ROM can be installed on your phone using
either CWM or TWRP recovery. Follow any method based on the recovery
mode installed on your device.
How to Install Android 4.4.4 AOSP ArchiDroid ROM via ClockworkMod (CWM) Recovery
- Power off the device and wait for 5 to 10 seconds until the device shuts down completely.
- Now boot the Galaxy S3 into Recovery mode by pressing and holding Volume Up, Home and Power button together until the recovery screen appears. NOTE: In recovery mode, use Volume keys to navigate between options and Power key to select the desired option.
- Perform Wipe data/Factory reset (this will
delete all apps and their settings and game progress) and choose Yes on
next screen to confirm the action. Then perform Wipe Cache Partition and once again hit Yes to confirm. - Return to CWM recovery main menu and select Mounts and Storage> Format / data and click Yes on next screen to confirm.
- From the main menu of CWM recovery, go to Advanced and choose Wipe Dalvik Cache. Then hit Yes on next screen to confirm.
- Select Install Zip from sdcard and then click Choose zip from sdcard. Browse to the location of the ArchiDroid ROM firmware file which you copied earlier to your phone's SD card. Choose Yes on next screen to confirm the ROM installation.
- Repeat the previous step to install Google Apps as well.
- Once Google Apps is also installed, select "+++++Go Back+++++" and reboot the device by tapping reboot system now from
the recovery menu. Your Galaxy S3 will restart and it may take about
five minutes for first boot. So, do not interrupt the process.
Your Galaxy S3 is now running on Android 4.4.4 KitKat via ArchiDroid ROM. Go to Settings > About Phone/Tablet to verify the firmware installed.
NOTE: If the device gets stuck at boot loop (while rebooting), then just do a factory reset from recovery mode to fix the issue.
How to Install Android 4.4.4 ArchiDroid ROM via TWRP Recovery
- Power off the device and wait for 5 to 10 seconds until the device shuts down completely.
- Now boot the Galaxy S3 into Recovery mode by pressing and holding Volume Up, Home and Power button together until the recovery screen appears. NOTE: In recovery mode, use Volume keys to navigate between options and Power key to select the desired option.
- Perform Wipe data/Factory reset (this will delete all apps and their settings and game progress). To do so, tap on Wipe and scroll down to the bottom of the screen and do a Swipe on "Swipe to factory reset" option.
- Now perform a System format by selecting Wipe > Advanced Wipe and then tap on System option. Scroll to the bottom of screen and do a swipe on "Swipe to Wipe" option.
- Tap on install and navigate to the ArchiDroid ROM zip file you copied earlier to your phone's SD card. Scroll to the bottom of screen and do a swipe on Swipe to confirm flash option to begin installing the firmware.
- Repeat the previous step to flash Google apps as well.
- Once Google Apps is also installed, select reboot and then tap on System to
reboot your device. Your Galaxy S3 will restart and it may take about
five minutes for first boot to complete. So, do not interrupt the
process.
Your Galaxy S3 is now running on Android 4.4.4 KitKat via ArchiDroid ROM. Go to Settings > About Phone to verify the firmware installed.
NOTE: If the device gets stuck at boot loop (while rebooting), then just do a factory reset from recovery mode to fix the issue.
- Androdvillaz reminds readers that it will not be held liable for any damage to the device during or after the ArchiDroid installation. Users are advised to proceed at their own risk.
0 Comments:
Post a Comment
Your comment and facebook share will be appreciated